DAAAM INTERNATIONAL SCIENTIFIC BOOK
Abb.: DAAAM int. sci. book, ISSN 1726-9687
2002-2007
|
Picture |
|
|
DAAAM International Scientific Book 2007 , ISSN 1726-9687, ISBN 3-901509-60-7, hard cover, Publisher DAAAM International Vienna, Editor: B.[ranko] Katalinic, Vienna 2007. Abbreviated key title: DAAAM int. sci. book (Promotion of the book at DAAAM 2007 Vienna 2006-11-08/11) |
|
|
DAAAM International Scientific Book 2006 , ISSN 1726-9687, ISBN 3-901509-47-X, hard cover, Publisher DAAAM International Vienna, Editor: B.[ranko] Katalinic, Vienna 2006. Abbreviated key title: DAAAM int. sci. book (Promotion of the book at DAAAM 2006 Vienna 2006-11-08/11) |
|
|
DAAAM International Scientific Book 2005 , ISSN 1726-9687, ISBN 3-901509-43 -7 , hard cover, Publisher DAAAM International Vienna, Editor: B.[ranko] Katalinic, Vienna 2005. Abbreviated key title: DAAAM int. sci. book |
|
|
DAAAM International Scientific Book 2004 , ISSN 1726-9687, ISBN 3-901509- 38-0 , 730 pages, hard cover, Publisher DAAAM International Vienna, Editor: B.[ranko] Katalinic, Vienna 2004. Abbreviated key title: DAAAM int. sci. book (Promotion of the book at DAAAM 2004 Vienna 2004-11-03/06) |
|
|
DAAAM International Scientific Book 2003 , ISSN 1726-9687, ISBN 3-901509-36-4, 654 pages, hard cover, Publisher DAAAM International Vienna, Editor: B.[ranko] Katalinic, Vienna 2003. Abbreviated key title: DAAAM int. sci. book (Promotion of the book at DAAAM 2003 Sarajevo 2003-10-22/25) |
|
|
DAAAM International Scientific Book 2002 , ISBN 3-901509-30-5, hard cover, 713 pages, Publisher DAAAM International Vienna, Editor: B.[ranko] Katalinic, Vienna, 2002. (Promotion of the book at DAAAM 2002 Vienna, 2002-10-23/26) |
ANNALS OF DAAAM & PROCEEDINGS OF DAAAM INTERNATIONAL SYMPOSIUM
Abb.: Ann. DAAAM proc. int. DAAAM Symp., ISSN 1726-9679
"INTELLIGENT MANUFACTURING & AUTOMATION"
1990-2006
|
|
Annals & Proceedings |
|
2007 |
Annals of DAAAM for 2007 and Proceeding of the 18th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Creativity, Responsibility and Ethics of Engineers" Editor: B. Katalinic, ISSN 1726-9679, ISBN 3-901509-58-5, 21-24th November 2007, Zadar, Croatia, Published by DAAAM International, Vienna, 2007 |
|
2006 |
Annals of DAAAM for 2006 and Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechatronics and Robotics" Editor: B. Katalinic, ISSN 1726-9679, ISBN 3-901509-57-7, 8-11th November 2006, Vienna, Austria, Published by DAAAM International, Vienna, 2006 |
|
2005 |
Annals of DAAAM for 2005 and Proceeding of the 16th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Young Scientists and Researchers", Editor: B. Katalinic, ISSN 1726-9679, ISBN 3-901509-46-1, 19-22nd October 2005, Opatija, Croatia, Published by DAAAM International, Vienna, 2005 |
|
2004 |
Annals of DAAAM for 2004 and Proceeding of the 15th International DAAAM Symposium, "Intelligent Manufacturing & Automation: Globalisation - Technology - Men - Nature", Editor: B. Katalinic, ISSN 1726-9679, ISBN 3-901509-42-9, 3-6th November 2004, Vienna, Published by DAAAM International, Vienna, 2004 |
|
2003 |
Annals of DAAAM for 2003 and Proceeding of the 14th International DAAAM Symposium, "Intelligent Manufacturing & Automation: Focus on Reconstruction and Development", Editor: B. Katalinic, ISSN 1726-9679, ISBN 3-901509-34-8, 22-25th October 2003, Sarajevo, Bosnia and Herzegovina, Published by DAAAM International, Vienna, 2003 |
|
2002 |
Annals of DAAAM for 2002 and Proceeding of 13th International DAAAM Symposium, ISBN 3-901509-29-1, "Intelligent Manufacturing & Automation: Learning from Nature", Editor: B. Katalinic, 23-26th October 2002, Vienna, Austria, Published by DAAAM International, Vienna, 2002 |
|
2001 |
Annals of DAAAM for 2001 and Proceeding of 12th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Precision Engineering", Editor: B. Katalinic, ISBN 3-901509-19-4, 24-27th October 2001, Jena, Germany, Published by DAAAM International, Vienna, 2001 |
|
2000 |
Annals of DAAAM for 2000 and Proceeding of 10th International DAAAM Symposium, "Intelligent Manufacturing & Automation: Men – Machine - Nature", Editor: B. Katalinic, ISBN 3-901509-13-5,19-21st October 2000, Opatija, Croatia, Published by DAAAM International, Vienna, 2000 |
|
1999 |
Annals of DAAAM for 1999 and Proceeding of 10th International DAAAM Symposium "Intelligent Manufacturing & Automation: Past – Present - Future", Editor: B. Katalinic, ISBN 3-901509-10-0, 21-23rd October 1999, Vienna, Austria, Published by DAAAM International, Vienna, 1999 |
|
1998 |
Annals of DAAAM for 1998 and Proceeding of 10th International DAAAM Symposium 8th International DAAAM Symposium "Intelligent Manufacturing, Automation & Networking", Editor: B. Katalinic, ISBN 3-901509-08-9, 22-24th October 1998, Cluj - Napoca, Romania, Published by DAAAM International, Vienna, 1998 |
|
1997 |
Proceeding of 8th International DAAAM Symposium "Intelligent Manufacturing & Automation", Editor: B. Katalinic, ISBN 3-901509-04-6, 23-25th October 1997, Dubrovnik, Croatia, Published by DAAAM International, Vienna, 1997 |
|
1996 |
Proceeding of 7th International DAAAM Symposium "Product & Manufacturing: Flexibility, Integration, Intelligence“, Editor: B. Katalinic, ISBN 3-901509-02-X, 17-19th October 1996, Vienna, Austria, Published by DAAAM International, Vienna, 1996 |
|
1995 |
Proceeding of 6th International DAAAM Symposium "Intelligent Manufacturing Systems", Editor: B. Katalinic, Co-editors: Osanna H.P., Gawlik J., ISBN 3-901509-01-1, 26 - 28th October 1995, Cracow, Poland, Published by DAAAM International, Vienna, 1995 |
|
1994 |
Proceeding of 5th International DAAAM Symposium "Automation and Metrology: Challenge and Chance", Editors: B. Katalinic, Osanna H.P., Balic J., Cus F., ISBN 3-901509-00-3, 27-28th October 1994, Maribor, Slovenia, Published by DAAAM International, Vienna, 1994 |
|
1993 |
Proceeding of 4th International DAAAM Symposium "Automation and Metrology: Man, Technology, Environment", Editors: B. Katalinic, Osanna H.P, 16-18th September 1993, Brno, Czech Republic, Published by DAAAM International, Vienna, 1993 |
|
1992 |
Proceeding of 3rd International DAAAM Symposium "Flexible and Intelligent Automation", Editor: B. Katalinic, 4-6th November 1992, Budapest, Hungary, Published by DAAAM International, Vienna, 1992 |
|
1991 |
Proceeding of 2nd International DAAAM Symposium "Flexible Automation", ISBN 80-233-0225-6, 9-13th December 1991, Strbske Pleso, Slovakia, Czechoslovakia |
|
1990 |
Proceeding of 1st International DAAAM Symposium "Automatization and Measurement Technique", Editor: B. Katalinic, 5th November 1990, Vienna, Austria, Published by DAAAM International, Vienna, 1990 |
PROCEEDINGS OF DAAAM INTERNATIONAL CONFERENCES ON
"ADVANCED TECHNOLOGIES FOR DEVELOPING COUNTRIES"
2002-2006
|
|
Proceedings |
|
2006 |
Proceedings of 5th DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2006, Editors: Mikac T.[onci] & Katalinic B.[ranko], ISBN 3-901509-54-2 (Book), ISBN3-901509-55-0 (CD), ISBN 953-6326-45-0, 28-30 June 2006, Rijeka, Croatia, Published by: University of Rijeka, Faculty of Engineering, DAAAM International Vienna |
|
2005 |
Proceedings of 4th DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2005, Editors: Kljain M.[ilan], Katalinic B.[ranko] & Budic I.[van], ISBN 3-901509-49-6 ISBN 953-6048-29-9, September, 21-24th, 2005, Slavonski Brod, Croatia, Published by: DAAAM International Vienna; Faculty of Mechanica Engineering Slavonski Brod Josip Juraj Strossmayer University of Osijek |
|
2004 |
Proceedings of 3rd DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2004, Editors: Katalinic B.[ranko] & Veza, I.[vica], ISBN 3-901509-41-0, June 23-26, 2004, Split, Croatia, Published by: DAAAM International Vienna; Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Split |
|
2003 |
Proceedings of 2nd DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2003, Editors: Katalinic B.[ranko] & Tufekcic, Dz.[emo], ISBN 3-901509-35-6, 25-28th June 2003, Tuzla, Bosnia and Herzegovina, Published by: Faculty of Mechanical Engineering, University of Tuzla and DAAAM International Vienna |
|
2002 |
Proceedings of 1st DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC-2002, Editors: Katalinic B.[ranko] & Kljajin M.[ilan], ISBN 3-901509-32-1; ISBN 953-7611-64-X, 12-14the September 2002, Slavonski Brod, Croatia, Publishers DAAAM International Vienna; Strossmayer University of Osijek - Faculty of Mechanical Engineering |
DAAAM INTERNATIONAL PUBLISHING BOOKS
1999-2006
|
|
Books |
|
Zvonko Kremnjak & Borut Buchmeister: "Uncertainty and Development of Capabilities", DAAAM Publishing Series – Management Science Editor: B. Katalinic, ISBN 3-901509-55-0, DAAAM International Vienna, Vienna, 2004 (Promotion at DAAAM 2006 – Vienna) |
|
|
2004 |
Zvonko Kremljak: "Decision making under risk” , DAAAM International Publishing Series – Management Science, Editor: B Katalinic, ISBN 3-901509-44-5, DAAAM International Vienna, Vienna 2004 (Promotion at DAAAM 2004 – Vienna) |
|
2003 |
Dragan Covic: "Inventivnost Tima – Vodic za menedzere” , (in Croatian) DAAAM International University Book, Editor: B Katalinic, ISBN 3-901509-25-4, DAAAM International Vienna Publishing Series – Management Science and University of Mostar, Mostar – Vienna, 2003 (Promotion October 2003, Sarajevo – Mostar) |
|
2001 |
Dragan Covic, Vlado Majstorovic & Vojo Visekruna: "Poslovni sustavi – Business Systems” , (in Croatian) DAAAM International University Book, Editor: B Katalinic, ISBN 3-901509-22-4, DAAAM International Vienna and University of Mostar, Mostar – Vienna, 2001 (Promotion at International Conference in Mostar, May 31st, 2001) |
|
2001 |
Vlado Majstorovic: "Upravljanje proizvodnjom i projektima – Production and Project Management” , (in Croatian) DAAAM International University Book, Editor: B Katalinic, ISBN 3-901509-23-2, DAAAM International Vienna and University of Mostar, Mostar – Vienna, 2001 (Promotion at International Conference in Mostar, May 31st, 2001) |
|
Joze Balic: "FMS: Development Structure, Operation, Handling, Tooling" , DAAAM Publishing series - Manufacturing technology, Editor: B Katalinic, ISBN 3-901509-20-8, DAAAM International Vienna, Publishing series - Manufacturing technology, Vienna 2001 (Promotion at DAAAM 2001- Jena) |
|
|
2000 |
Borut Buchmeister: "English-Slovene Glossary of Terms used in Production Engineering and Production Management" , DAAAM Publishing series - Manufacturing technology, Editor: B Katalinic, ISBN 3-901509-17-8, Publishing series - Manufacturing technology, DAAAM International Vienna, Vienna 2000 (Promotion at DAAAM 2000 - Opatija) |
|
Joze Balic: "Contribution to Integrated Manufacturing" , DAAAM Publishing series - Manufacturing technology, Editor: B Katalinic, ISBN 3-901509-03-8, DAAAM International Vienna, Publishing series - Manufacturing technology, Vienna 1999 (Promotion at DAAAM 1999 - Vienna) |
PROCEEDINGS OF DAAAM INTERNATIONAL WORKSHOP
"COMPUTER AIDED SYSTEMS AND TECHNOLOGIES"
1997-2006
|
|
Proceedings |
|
2006 |
Proceedings of 11th DAAAM International Workshop “CA Systems and Technologies”, Editors: Duda J.[an], Kuric I.[van] & Katalinic B.[ranko], ISBN 3-901509-56-9, 2 – 4th October 2006, Cracow, Poland, Publishers: CUT Cracow, DAAAM International Vienna, 2006 |
|
2005 |
Proceedings of 10th DAAAM International Workshop “CA Systems and Technologies”, Editors: Kuric I.[van] & Katalinic B.[ranko], ISBN 3-901509-51-8, 12 – 14th December 2005, Strecno - Zilina, Slovak Republic, Publishers: University of Zilina, DAAAM International Vienna, 2005 |
|
2004 |
Proceedings of 9th DAAAM International Workshop “CA Systems and Technologies”, Editors: Duda J.[an] & Katalinic B.[ranko], ISBN 83-7242-320-2, 5 - 6th October 2004, Cracow, Poland, Publishers: CUT Cracow, DAAAM International Vienna, 2004 |
|
2003 |
Proceedings of 8th DAAAM International Workshop “CA Systems and Technologies”, Editors: Kuric I.[van] & Katalinic B.[ranko], ISBN 3-901509-39-9, 29th September - 1st October 2003, Strecno - Zilina, Slovak Republic, Publishers: University of Zilina, DAAAM International Vienna, 2003 |
|
2002 |
Proceedings of 7th DAAAM International Workshop “CA Systems and Technologies”, Editors: Duda J.[an] & Katalinic B.[ranko], ISBN 3-901509-33-X, 8-9th October 2002, CUT Cracow, Poland , Publishers: CUT Cracow, DAAAM International Vienna, 2002 |
|
2001 |
Proceedings of 6th DAAAM International Workshop “CA Systems and Technologies”, Editors: Kuric I.[van] & Katalinic B.[ranko], ISBN 3-901509-27-5, 25-26th September 2001, Sulov, Slovak Republic, Publishers: University of Zilina, DAAAM International Vienna, 2001 |
|
2000 |
5th DAAAM International Workshop “CA Systems and Technologies”, Editors: Duda J.[an], Kuric I.[van] & Katalinic B.[ranko], ISBN 3-901509-16-X, 28-29th September 2000, Cracow, Poland, Publishers: CUT Cracow, DAAAM International Vienna, 2000 |
|
1999 |
Proceedings of 4th DAAAM International Workshop “CA Systems and Technologies: Advanced Methodology of Process Planning”, Editors: Kuric I.[van] & Katalinic B.[ranko], ISBN 3-901509-12-7, 12-13th October 1999, Zilina, Slovak Republic, Publishers: University of Zilina, DAAAM International Vienna, 1999 |
|
1998 |
Proceedings of 3rd DAAAM International Workshop “CA Systems and Technologies”, Editor: Kuric I.[van], 29-30th September 1998, Cracow, Poland, Publishers: CUT Cracow, DAAAM International Vienna, 1998 |
|
1997 |
Proceedings of 2nd International DAAAM Workshop "CA Systems and Technologies“, Editor: Kuric I.[van], 19th March 1997, Zilina, Slovakia, Publishers: University of Zilina, DAAAM International Vienna, 1997 |